FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Case 580 Super L Parts

Category: Hydraulic System

[Categories] [All 580 Super L Parts] [All Case Models]

No
Picture
Dipper Cylinder To Boom Pin - For Case Construction and industrial models 580 Super L, 580 Super M, Replaces Case OEM number 123167A2, 123167A1, (Item #: 154393) $143.00

No
Picture
Dump Link To Bucket Coupler Pin - For Case Construction and industrial models 570LXT, 580L, 580 Super L, 580 Super M, 590, 590 Super L, Replaces Case OEM number 119129A1, 335177A1, (Item #: 154392) $86.00

No
Picture
Dump Link To Bucket Coupler Pin - For Case Construction and industrial models 570LXT, 580K, 580L, 580M, 580SK, 580 Super L, 580 Super M, 590, 590 Super L, 590 Super M, Replaces Case OEM number D146288, Length: 6.57" (167mm), O.D.: 1.75" (44.45mm), (Item #: 154397) $57.50

No
Picture
Hydraulic Pump - For Case Construction and industrial models 580M, 580 Super L, 580 Super L (II), 580 Super M, Replaces Case OEM number 257954A1, 87433897, Splines: 17, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, Additional Handling and Oversize Fees Apply To This Item, (Item #: 157568) $1099.01

No
Picture
Hydraulic Pump - For Case Construction and industrial models 580L, 580M, 580 Super L, Replaces Case OEM number 87433897R, (Item #: 170586) $1359.01

Hydraulic Pump Coupler - For Case Construction and industrial models 570LXT, 580L, 580 Super L, 585G, 586G, 588G, 590 Super L, Replaces Case OEM number 253541A1, D136083, 15 Spline, Used with pumps 130258A1, 130258A2, (Item #: 152208) $55.00

Hydraulic Pump Drive Coupler - For Case Construction and industrial models W11, 450, 455, 455C, 480E, 480ELL, 480F, 480FLL, 550, 570LXT, 580K, 580L, 580M, 580SE, 580SK, 580 Super L, 584, 585, 586, 590, 590 Super L, Replaces Case OEM number J905820, (Item #: 152149) $38.80

Hydraulic Seal Kit - Boom Cylinder - For Case Construction and industrial models 580 Super L, 580 Super M, Replaces Case OEM number 1542919C4, (Item #: 152992) $72.00

Hydraulic Seal Kit - Bucket Cylinder - For Case Construction and industrial models 580, 580K, 580L, 580M, 580SK, 580 Super L, 580 Super M, 590, 590 Super L, Replaces Case OEM number 1542923C2, Rod: 2-1/2", Bore: 3-1/2", (Item #: 153658) $37.10

Hydraulic Seal Kit - Dipper Cylinder - For Case Construction and industrial models 580K, 580SK, 580 Super L, 580 Super M, Replaces Case OEM number 1542915C2, Rod: 2-1/2", Bore: 5", (Item #: 153657) $46.50

Hydraulic Seal Kit - Loader Lift Cylinder - For Case Construction and industrial models 580M, 580 Super L, 580 Super M, 580 Super M (Series 3), 590 Super M, Replaces Case OEM number 1543260C1, (Item #: 152884) $26.50

Hydraulic Seal Kit - Stabilizer Cylinder - For Case Construction and industrial models 580K, 580SK, 580 Super L, 580 Super M, Replaces Case OEM number 1543275C1, (Item #: 152860) $24.40

Hydraulic Seal Kit - Stick Boom Extendable Clam Cylinder - For Case Construction and industrial models 480F, 480FLL, 550, 580, 580L, 580M, 580 Super L, 580 Super M, 590, 590 Super L, 621, 721, Replaces Case OEM number 1543267C1, Rod: 1-3/4", Bore: 3", (Item #: 152892) $34.00

Hydraulic Seal Kit - Swing Cylinder - For Case Construction and industrial models 580, 580L, 580 Super L, 580 Super M, 590, 590 Super L, Replaces Case OEM number 122535A1, Rod: 2", Bore: 4", (Item #: 152904) $38.80

Swing Arm Tower To Frame Upper Pin - For Case Construction and industrial models 570LXT, 580L, 580M, 580 Super L, 580 Super M, Replaces Case OEM number 132890A1, 292385A1, (Item #: 154399) $159.52

No
Picture
Swing Tower To Boom Pin - For Case Construction and industrial models 570LXT, 580L, 580 Super L, Replaces Case OEM number 121779A1, Swing Tower To Boom, (Item #: 154390) $103.22

Universal Parts and Accessories
Category: Hydraulic System

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.40

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.60

No
Picture
Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.10

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 36 inch - Universal. 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends, 36" overall length. Replaces OEM 407436R1. (Item #: 118260, Ref: H42-2M-36) $15.20

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Hydraulic Pump Mounting Bracket - This Hydraulic Pump Mounting Bracket is used for front mounted hydraulic pumps often used with loaders. For use with SAE A 2 bolt flange type pumps. Has 2 tapped mount holes 3/8 inch diameter, 4-3/16 inch center to center. Also 2 foot mount holes 3/8 inch diameter, 5 inch center to center. Center pilot hole 3-1/4 inch diameter. Fits L827-10X-LB, 40P018LAJSA and 195453 pumps. May fit other pumps. Verify measurements before ordering. (Item #: 184547, Ref: 33020-1) $377.00

Hydraulic Pump, Front Mounted - This Hydraulic Pump is used with various loader configurations. 14 GPM and 2, 000 RPM. 3/4 inch round shaft with key way. Left hand Rotation. Inlet ORB 1-5/16 inch. Outlet ORB 1-1/16 inch. SAE A Mounting. Bolt holes are 3/8 inch, 4 3/16 inch center to center. Replaces 192504, 195453. (Item #: 182701, Ref: 40P018LAJSA) $720.00

Moreflex Series 352 Coupler Drive Flange - Coupler for Hydraulic pump drive shaft. 13 spline for 7/8 inch diameter shaft. 5/16 inch diameter bolt holes, 2-1/4 inch on center. For 352. (Item #: 112243, Ref: L78-13) $28.00

PTO Mounted Hydraulic Pump - For 540 RPM 6 spline 1 3/8 Shaft. 21 GPM, 2000 Max PSI. Mounts on shaft. Straight thru design allows normal PTO use with extension shaft. Has two outlet ports. Inlet 1 5/16 - 12 ORB. Outlets 1 1/16 - 12 ORB. Recommended hose sizes 1 1/4 inlet, 3/4 outlet. (Item #: 120040, Ref: HC-PTO-1A) $1159.01

Universal Pressure Gauge, Hydraulic - 300lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1/4 NPT male brass fitting. (Item #: 184977, Ref: GG300) $11.37

Universal Pressure Gauge, Hydraulic - 3000 Lb. Gauge. Glycerin Filled. Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Plexiglass crystal. 1/4 inch NPT male brass fitting. (Item #: 178343, Ref: GG3000) $14.60

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $13.50

Universal Pressure Gauge, Hydraulic - 600 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172337, Ref: GG600) $13.91

Universal Pressure Gauge, Hydraulic - 400 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel Silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas Crystal. 1/4 NPT male brass fitting. (Item #: 178202, Ref: GG400) $10.70

Universal Pressure Gauge, Hydraulic - 160 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1/4 NPT male brass fitting. (Item #: GG160) $9.96

Universal Pressure Gauge, Hydraulic - 100 LB Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: GG100) $9.96

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $13.91

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Hydraulic System

[Categories] [All 580 Super L Parts] [All Case Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy